🌌 SpectraShell

Current path: usr/sbin/

✏️ Editing: exigrep

#! /usr/local/cpanel/3rdparty/perl/542/bin/perl

# Copyright (c) The Exim Maintainers 2020 - 2025
# Copyright (c) 2007-2017 University of Cambridge.
# See the file NOTICE for conditions of use and distribution.
# SPDX-License-Identifier: GPL-2.0-or-later

use warnings;
use strict;
BEGIN { pop @INC if $INC[-1] eq '.' };

use Pod::Usage;
use Getopt::Long qw(:config no_ignore_case);
use File::Basename;

# Except when they appear in comments, the following placeholders in this
# source are replaced when it is turned into a runnable script:
#
# PERL_COMMAND
# ZCAT_COMMAND
# COMPRESS_SUFFIX
# MSGID_RE

# This file has been so processed.

# This is a perl script which extracts from an Exim log all entries
# for all messages that have an entry that matches a given pattern.
# If *any* entry for a particular message matches the pattern, *all*
# entries for that message are displayed.

# We buffer up information on a per-message basis. It is done this way rather
# than reading the input twice so that the input can be a pipe.

# There must be one argument, which is the pattern. Subsequent arguments
# are the files to scan; if none, the standard input is read. If any file
# appears to be compressed, it is passed through zcat. We can't just do this
# for all files, because zcat chokes on non-compressed files.

# Performance optimized in 02/02/2007 by Jori Hamalainen
# Typical run time acceleration: 4 times

use POSIX qw(mktime);

# Insert MSGID_RE
# Start msgid.frag
# Copyright (c) The Exim Maintainers 2025
# SPDX-License-Identifier: GPL-2.0-or-later
#
# Regex patterns for exim message-id

# Simple matching

my $b62 = "[[:alnum:]]";

my $msgid_sec_re = "${b62}{6}";
my $msgid_pid_new_re = "${b62}{11}";
my $msgid_pid_old_re = "${b62}{6}";
my $msgid_frc_new_re = "${b62}{4}";
my $msgid_frc_old_re = "${b62}{2}";

my $msgid_new_re = "$msgid_sec_re-$msgid_pid_new_re-$msgid_frc_new_re";
my $msgid_old_re = "$msgid_sec_re-$msgid_pid_old_re-$msgid_frc_old_re";
my $msgid_re =     "(?:$msgid_new_re|$msgid_old_re)";

# Match with content submatches
# - requires variables seconds, pid, fractions

my $msgid_sec_cap_re = "(?<seconds>$msgid_sec_re)";
my $msgid_pid_cap_re = "(?<pid>(?:$msgid_pid_new_re|$msgid_pid_old_re))";
my $msgid_frc_cap_re = "(?<fractions>(?:$msgid_frc_new_re|$msgid_frc_old_re))";

my $msgid_cap_re = "(?:$msgid_sec_cap_re-$msgid_pid_cap_re-$msgid_frc_cap_re)";

# End msgid.frag

# This subroutine converts a time/date string from an Exim log line into
# the number of seconds since the epoch. It handles optional timezone
# information.

sub seconds
  {
  my($year,$month,$day,$hour,$min,$sec,$tzs,$tzh,$tzm) =
    $_[0] =~ /^(\d{4})-(\d\d)-(\d\d)\s(\d\d):(\d\d):(\d\d)(?:.\d+)?(?>\s([+-])(\d\d)(\d\d))?/o;

my $seconds = mktime $sec, $min, $hour, $day, $month - 1, $year - 1900;

if (defined $tzs)
    {
    $seconds -= $tzh * 3600 + $tzm * 60 if $tzs eq "+";
    $seconds += $tzh * 3600 + $tzm * 60 if $tzs eq "-";
    }

return $seconds;
  }

# This subroutine processes a single line (in $_) from a log file. Program
# defensively against short lines finding their way into the log.

my (%saved, %id_list, $pattern);

my $queue_time  = -1;
my $insensitive = 1;
my $invert      = 0;
my $related     = 0;
my $use_pager   = 1;
my $literal     = 0;

# If using "related" option, have to track extra message IDs
my $related_re='';
my @Mids = ();

sub do_line
  {

# Convert syslog lines to mainlog format, as in eximstats.

if (!/^\d{4}-/o) { $_ =~ s/^.*? exim\b.*?: //o; }

return unless
    my($date,$id) = /^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d(?:\.\d+)? (?:[+-]\d{4} )?)(?:\[\d+\] )?($msgid_re)?/o;

# Handle the case when the log line belongs to a specific message. We save
  # lines for specific messages until the message is complete. Then either print
  # or discard.

if (defined $id)
    {
    $saved{$id} = '' unless defined($saved{$id});

# Save up the data for this message in case it becomes interesting later.

$saved{$id} .= $_;

# Are we interested in this id ? Short circuit if we already were interested.

if ($invert)
      {
      $id_list{$id} = 1 if (!defined($id_list{$id}));
      $id_list{$id} = 0 if (($insensitive && /$pattern/io) || /$pattern/o);
      }
    else
      {
      if (defined $id_list{$id} ||
	($insensitive && /$pattern/io) || /$pattern/o)
	{
	$id_list{$id} = 1;
	get_related_ids($id) if $related;
	}
      elsif ($related && $related_re)
	{
	grep_for_related($_, $id);
	}
      }

# See if this is a completion for some message. If it is interesting,
    # print it, but in any event, throw away what was saved.

if (index($_, 'Completed') != -1 ||
	index($_, 'SMTP data timeout') != -1 ||
	  (index($_, 'rejected') != -1 &&
	    /^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d(?:\.\d+)? (?:[+-]\d{4} )?)(?:\[\d+\] )?$msgid_re rejected/o))
      {
      if ($queue_time != -1 &&
	  $saved{$id} =~ /^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d ([+-]\d{4} )?)/o)
	{
	my $old_sec = &seconds($1);
	my $sec = &seconds($date);
	$id_list{$id} = 0 if $id_list{$id} && $sec - $old_sec <= $queue_time;
	}

print "$saved{$id}\n" if ($id_list{$id});
      delete $id_list{$id};
      delete $saved{$id};
      }
    }

# Handle the case where the log line does not belong to a specific message.
  # Print it if it is interesting.

elsif ( ($invert && (($insensitive && !/$pattern/io) || !/$pattern/o)) ||
	 (!$invert && (($insensitive &&  /$pattern/io) ||  /$pattern/o)) )
    { print "$_\n"; }
  }

# Rotated log files are frequently compressed and there are a variety of
# formats it could be compressed with. Rather than use just one that is
# detected and hardcoded at Exim compile time, detect and use what the
# logfile is compressed with on the fly.
#
# List of known compression extensions and their associated commands:
my $compressors = {
  gz   => { cmd => 'zcat',  args => '' },
  bz2  => { cmd => 'bzcat', args => '' },
  xz   => { cmd => 'xzcat', args => '' },
  lzma => { cmd => 'lzma',  args => '-dc' },
  zst  => { cmd => 'zstdcat', args => '' },
};
my $csearch = 0;

sub detect_compressor_bin
  {
  my $ext = shift();
  my $c = $compressors->{$ext}->{cmd};
  $compressors->{$ext}->{bin} = `which $c 2>/dev/null`;
  chomp($compressors->{$ext}->{bin});
  }

sub detect_compressor_capable
  {
  my $filename = shift();
  map { &detect_compressor_bin($_) } keys %$compressors
    if (!$csearch);
  $csearch = 1;
  return undef
    unless (grep {$filename =~ /\.(?:$_)$/} keys %$compressors);
  # Loop through them, figure out which one it detected,
  # and build the commandline.
  my $cmdline = undef;
  foreach my $ext (keys %$compressors)
    {
    if ($filename =~ /\.(?:$ext)$/)
      {
      # Just die if compressor not found; if this occurs in the middle of
      # two valid files with a lot of matches, error could easily be missed.
      die("Didn't find $ext decompressor for $filename\n")
        if ($compressors->{$ext}->{bin} eq '');
      $cmdline = $compressors->{$ext}->{bin} ." ".
                   $compressors->{$ext}->{args};
      last;
      }
    }
  return $cmdline;
  }

sub grep_for_related
  {
  my ($line,$id) = @_;
  $id_list{$id} = 1 if $line =~ m/$related_re/;
  }

sub get_related_ids
  {
  my ($id) = @_;
  push @Mids, $id unless grep /\b$id\b/, @Mids;
  my $re = join '|', @Mids;
  $related_re = qr/$re/;
  }

# The main program. Extract the pattern and make sure any relevant characters
# are quoted if the -l flag is given. The -t flag gives a time-on-queue value
# which is an additional condition. The -M flag will also display "related"
# loglines (msgid from matched lines is searched in following lines).

GetOptions(
    'I|sensitive' => sub { $insensitive = 0 },
      'l|literal' => \$literal,
      'M|related' => \$related,
      't|queue-time=i' => \$queue_time,
      'pager!'         => \$use_pager,
      'v|invert'       => \$invert,
      'h|help'         => sub { pod2usage(-exit => 0, -verbose => 1) },
      'm|man'          => sub {
        pod2usage(
            -exit      => 0,
            -verbose   => 2,
            -noperldoc => system('perldoc -V 2>/dev/null >&2')
        );
      },
      'version'        => sub {
            print basename($0) . ": $0\n",
                "build: 4.100.1\n",
                "perl(runtime): $]\n";
            exit 0;
      },
) and @ARGV or pod2usage;

$pattern = shift @ARGV;
$pattern = quotemeta $pattern if $literal;

# Start a pager if output goes to a terminal
if (-t 1 and $use_pager)
  {
  # for perl >= v5.10.x: foreach ($ENV{PAGER}//(), 'less', 'more')
  foreach (defined $ENV{PAGER} ? $ENV{PAGER} : (), 'less', 'more')
    {
    local $ENV{LESS} .= ' --no-init --quit-if-one-screen';
    open(my $pager, '|-', $_) or next;
    select $pager;
    last;
    }
  }

# If file arguments are given, open each one and process according as it is
# is compressed or not.

if (@ARGV)
  {
  foreach (@ARGV)
    {
    my $filename = $_;
    if (-x '/bin/zcat' && $filename =~ /\.(?:gz)$/o)
      {
      open(LOG, "/bin/zcat $filename |") ||
        die "Unable to zcat $filename: $!\n";
      }
    elsif (my $cmdline = &detect_compressor_capable($filename))
      {
      open(LOG, "$cmdline $filename |") ||
        die "Unable to decompress $filename: $!\n";
      }
    else
      {
      open(LOG, "<$filename") || die "Unable to open $filename: $!\n";
      }
    do_line() while (<LOG>);
    close(LOG);
    }
  }

# If no files are named, process STDIN only

else { do_line() while (<STDIN>); }

# At the end of processing all the input, print any uncompleted messages.

for (keys %id_list)
  {
  print "+++ $_ has not completed +++\n$saved{$_}\n";
  }

__END__

=head1 NAME

exigrep - search Exim's main log

=head1 SYNOPSIS

B<exigrep> [options] pattern [log] ...

=head1 DESCRIPTION

The B<exigrep> utility is a Perl script that searches one or more main log
files for entries that match a given pattern.  When it finds  a  match,
it  extracts  all  the  log  entries for the relevant message, not just
those that match the pattern.  Thus, B<exigrep> can extract  complete  log
entries  for  a  given  message, or all mail for a given user, or for a
given host, for example.

If no file names are given on the command line, the standard input is read.

For known file extensions indicating compression (F<.gz>, F<.bz2>, F<.xz>,
F<.lzma>, and F<.zst>) a suitable de-compressor is used, if available.

The output is sent through a pager if a terminal is connected to STDOUT. As
pager are considered: C<$ENV{PAGER}>, C<less>, C<more>.

=head1 OPTIONS

=over

=item B<-l>|B<--literal>

This means 'literal', that is, treat all characters in the
pattern  as standing for themselves.  Otherwise the pattern must be a
Perl regular expression.  The pattern match is case-insensitive.

=item B<-t>|B<--queue-time> I<seconds>

Limit the output to messages that spent at least I<seconds> in the
queue.

=item B<-I>|B<--sensitive>

Do a case sensitive search.

=item B<-v>|B<--invert>

Invert the meaning of the search pattern. That is, print message log
entries that are not related to that pattern.

=item B<-M>|B<--related>

Search for related messages too.

=item B<--no-pager>

Do not use a pager, even if STDOUT is connected to a terminal.

=item B<-h>|B<--help>

Print a short reference help. For more detailed help try L<exigrep(8)>,
or C<exigrep --man>.

=item B<-m>|B<--man>

Print this manual page of B<exigrep>.

=back

=head1 SEE ALSO

L<exim(8)>, L<perlre(1)>, L<Exim|http://exim.org/>

=head1 AUTHOR

This  manual  page  was stitched together from spec.txt by Andreas Metzler L<ametzler at downhill.at.eu.org>
and updated by Heiko Schlittermann L<hs@schlittermann.de>.

=cut

# vim:ft=perl:

📄 accessdb | ✏️ Edit
📄 accton | ✏️ Edit
📄 addgnupghome | ✏️ Edit
📄 addpart | ✏️ Edit
📄 adduser | ✏️ Edit
📄 agetty | ✏️ Edit
📄 alternatives | ✏️ Edit
📄 anacron | ✏️ Edit
📄 apachectl | ✏️ Edit
📄 applygnupgdefaults | ✏️ Edit
📄 arp | ✏️ Edit
📄 arping | ✏️ Edit
📄 arptables | ✏️ Edit
📄 arptables-nft | ✏️ Edit
📄 arptables-nft-restore | ✏️ Edit
📄 arptables-nft-save | ✏️ Edit
📄 arptables-restore | ✏️ Edit
📄 arptables-save | ✏️ Edit
📄 atd | ✏️ Edit
📄 atrun | ✏️ Edit
📄 auditctl | ✏️ Edit
📄 auditd | ✏️ Edit
📄 augenrules | ✏️ Edit
📄 aureport | ✏️ Edit
📄 ausearch | ✏️ Edit
📄 automount | ✏️ Edit
📄 autrace | ✏️ Edit
📄 avcstat | ✏️ Edit
📄 badblocks | ✏️ Edit
📄 biosdecode | ✏️ Edit
📄 blkdeactivate | ✏️ Edit
📄 blkdiscard | ✏️ Edit
📄 blkid | ✏️ Edit
📄 blkmapd | ✏️ Edit
📄 blkzone | ✏️ Edit
📄 blockdev | ✏️ Edit
📄 blockip | ✏️ Edit
📄 bridge | ✏️ Edit
📄 capsh | ✏️ Edit
📄 cfdisk | ✏️ Edit
📄 cgdisk | ✏️ Edit
📄 chcpu | ✏️ Edit
📄 check_forensic | ✏️ Edit
📄 chgpasswd | ✏️ Edit
📄 chkconfig | ✏️ Edit
📄 chpasswd | ✏️ Edit
📄 chroot | ✏️ Edit
📄 clamd | ✏️ Edit
📄 clock | ✏️ Edit
📄 collectd | ✏️ Edit
📄 collectdmon | ✏️ Edit
📄 conntrack | ✏️ Edit
📄 conntrackd | ✏️ Edit
📄 consoletype | ✏️ Edit
📄 convertquota | ✏️ Edit
📄 cracklib-check | ✏️ Edit
📄 cracklib-format | ✏️ Edit
📄 cracklib-packer | ✏️ Edit
📄 cracklib-unpacker | ✏️ Edit
📄 create-cracklib-dict | ✏️ Edit
📄 crond | ✏️ Edit
📄 ctrlaltdel | ✏️ Edit
📄 ctstat | ✏️ Edit
📄 dcb | ✏️ Edit
📄 ddns-confgen | ✏️ Edit
📄 debugfs | ✏️ Edit
📄 delpart | ✏️ Edit
📄 depmod | ✏️ Edit
📄 devlink | ✏️ Edit
📄 dhclient | ✏️ Edit
📄 dhclient-script | ✏️ Edit
📄 dmfilemapd | ✏️ Edit
📄 dmidecode | ✏️ Edit
📄 dmsetup | ✏️ Edit
📄 dmstats | ✏️ Edit
📄 dnssec-cds | ✏️ Edit
📄 dnssec-checkds | ✏️ Edit
📄 dnssec-coverage | ✏️ Edit
📄 dnssec-dsfromkey | ✏️ Edit
📄 dnssec-importkey | ✏️ Edit
📄 dnssec-keyfromlabel | ✏️ Edit
📄 dnssec-keygen | ✏️ Edit
📄 dnssec-keymgr | ✏️ Edit
📄 dnssec-revoke | ✏️ Edit
📄 dnssec-settime | ✏️ Edit
📄 dnssec-signzone | ✏️ Edit
📄 dnssec-verify | ✏️ Edit
📄 dovecot | ✏️ Edit
📄 dovecot_cpshutdown | ✏️ Edit
📄 dpll | ✏️ Edit
📄 dump-acct | ✏️ Edit
📄 dump-utmp | ✏️ Edit
📄 dumpe2fs | ✏️ Edit
📄 e2freefrag | ✏️ Edit
📄 e2fsck | ✏️ Edit
📄 e2image | ✏️ Edit
📄 e2label | ✏️ Edit
📄 e2mmpstatus | ✏️ Edit
📄 e2undo | ✏️ Edit
📄 e4crypt | ✏️ Edit
📄 e4defrag | ✏️ Edit
📄 ebtables | ✏️ Edit
📄 ebtables-nft | ✏️ Edit
📄 ebtables-nft-restore | ✏️ Edit
📄 ebtables-nft-save | ✏️ Edit
📄 ebtables-restore | ✏️ Edit
📄 ebtables-save | ✏️ Edit
📄 ebtables-translate | ✏️ Edit
📄 edquota | ✏️ Edit
📄 eiguserproc | ✏️ Edit
📄 ether-wake | ✏️ Edit
📄 ethtool | ✏️ Edit
📄 exicyclog | ✏️ Edit
📄 exigrep | ✏️ Edit
📄 exim | ✏️ Edit
📄 eximstats | ✏️ Edit
📄 exim_checkaccess | ✏️ Edit
📄 exim_dbmbuild | ✏️ Edit
📄 exim_dumpdb | ✏️ Edit
📄 exim_fixdb | ✏️ Edit
📄 exim_lock | ✏️ Edit
📄 exim_tidydb | ✏️ Edit
📄 exinext | ✏️ Edit
📄 exiqgrep | ✏️ Edit
📄 exiqsumm | ✏️ Edit
📄 exiwhat | ✏️ Edit
📄 exportfs | ✏️ Edit
📄 faillock | ✏️ Edit
📄 fbguard | ✏️ Edit
📄 fb_lock_print | ✏️ Edit
📄 fcgistarter | ✏️ Edit
📄 fdformat | ✏️ Edit
📄 fdisk | ✏️ Edit
📄 fedfs-map-nfs4 | ✏️ Edit
📄 filefrag | ✏️ Edit
📄 findfs | ✏️ Edit
📄 firebird | ✏️ Edit
📄 firewall | ✏️ Edit
📄 firewall.pl | ✏️ Edit
📄 firewalld | ✏️ Edit
📄 fix-info-dir | ✏️ Edit
📄 fixfiles | ✏️ Edit
📄 fixparts | ✏️ Edit
📄 fsck | ✏️ Edit
📄 fsck.cramfs | ✏️ Edit
📄 fsck.ext2 | ✏️ Edit
📄 fsck.ext3 | ✏️ Edit
📄 fsck.ext4 | ✏️ Edit
📄 fsck.minix | ✏️ Edit
📄 fsck.xfs | ✏️ Edit
📄 fsfreeze | ✏️ Edit
📄 fstrim | ✏️ Edit
📄 fuser | ✏️ Edit
📄 g13-syshelp | ✏️ Edit
📄 gdisk | ✏️ Edit
📄 generate-fmtutilcnf | ✏️ Edit
📄 genhomedircon | ✏️ Edit
📄 genhostid | ✏️ Edit
📄 genl | ✏️ Edit
📄 getcap | ✏️ Edit
📄 getenforce | ✏️ Edit
📄 getpcaps | ✏️ Edit
📄 getpidprevcon | ✏️ Edit
📄 getpolicyload | ✏️ Edit
📄 getsebool | ✏️ Edit
📄 groupadd | ✏️ Edit
📄 groupdel | ✏️ Edit
📄 groupmems | ✏️ Edit
📄 groupmod | ✏️ Edit
📄 grpck | ✏️ Edit
📄 grpconv | ✏️ Edit
📄 grpunconv | ✏️ Edit
📄 grub2-bios-setup | ✏️ Edit
📄 grub2-get-kernel-settings | ✏️ Edit
📄 grub2-install | ✏️ Edit
📄 grub2-macbless | ✏️ Edit
📄 grub2-mkconfig | ✏️ Edit
📄 grub2-probe | ✏️ Edit
📄 grub2-reboot | ✏️ Edit
📄 grub2-set-bootflag | ✏️ Edit
📄 grub2-set-default | ✏️ Edit
📄 grub2-set-password | ✏️ Edit
📄 grub2-setpassword | ✏️ Edit
📄 grub2-switch-to-blscfg | ✏️ Edit
📄 grubby | ✏️ Edit
📄 gssproxy | ✏️ Edit
📄 halt | ✏️ Edit
📄 hdparm | ✏️ Edit
📄 htcacheclean | ✏️ Edit
📄 httpd | ✏️ Edit
📄 hwclock | ✏️ Edit
📄 iconvconfig | ✏️ Edit
📄 ifconfig | ✏️ Edit
📄 ifenslave | ✏️ Edit
📄 ifstat | ✏️ Edit
📄 inbound-whitelist | ✏️ Edit
📄 incrond | ✏️ Edit
📄 init | ✏️ Edit
📄 insmod | ✏️ Edit
📄 install-info | ✏️ Edit
📄 installkernel | ✏️ Edit
📄 intel_sdsi | ✏️ Edit
📄 ip | ✏️ Edit
📄 ip6tables | ✏️ Edit
📄 ip6tables-nft | ✏️ Edit
📄 ip6tables-nft-restore | ✏️ Edit
📄 ip6tables-nft-save | ✏️ Edit
📄 ip6tables-restore | ✏️ Edit
📄 ip6tables-restore-translate | ✏️ Edit
📄 ip6tables-save | ✏️ Edit
📄 ip6tables-translate | ✏️ Edit
📄 ipmaddr | ✏️ Edit
📄 ipset | ✏️ Edit
📄 ipset-translate | ✏️ Edit
📄 iptables | ✏️ Edit
📄 iptables-nft | ✏️ Edit
📄 iptables-nft-restore | ✏️ Edit
📄 iptables-nft-save | ✏️ Edit
📄 iptables-restore | ✏️ Edit
📄 iptables-restore-translate | ✏️ Edit
📄 iptables-save | ✏️ Edit
📄 iptables-translate | ✏️ Edit
📄 iptunnel | ✏️ Edit
📄 irqbalance | ✏️ Edit
📄 irqbalance-ui | ✏️ Edit
📄 iscsi-iname | ✏️ Edit
📄 iscsiadm | ✏️ Edit
📄 iscsid | ✏️ Edit
📄 iscsistart | ✏️ Edit
📄 iscsiuio | ✏️ Edit
📄 kexec | ✏️ Edit
📄 key.dns_resolver | ✏️ Edit
📄 kpartx | ✏️ Edit
📄 lchage | ✏️ Edit
📄 ldattach | ✏️ Edit
📄 ldconfig | ✏️ Edit
📄 lgroupadd | ✏️ Edit
📄 lgroupdel | ✏️ Edit
📄 lgroupmod | ✏️ Edit
📄 lid | ✏️ Edit
📄 lldpcli | ✏️ Edit
📄 lldpctl | ✏️ Edit
📄 lldpd | ✏️ Edit
📄 lnewusers | ✏️ Edit
📄 lnstat | ✏️ Edit
📄 load_policy | ✏️ Edit
📄 logrotate | ✏️ Edit
📄 logsave | ✏️ Edit
📄 losetup | ✏️ Edit
📄 lpasswd | ✏️ Edit
📄 lshw | ✏️ Edit
📄 lsmod | ✏️ Edit
📄 luseradd | ✏️ Edit
📄 luserdel | ✏️ Edit
📄 lusermod | ✏️ Edit
📄 makedumpfile | ✏️ Edit
📄 matchpathcon | ✏️ Edit
📄 mii-diag | ✏️ Edit
📄 mii-tool | ✏️ Edit
📄 mkdict | ✏️ Edit
📄 mkdumprd | ✏️ Edit
📄 mke2fs | ✏️ Edit
📄 mkfs | ✏️ Edit
📄 mkfs.cramfs | ✏️ Edit
📄 mkfs.ext2 | ✏️ Edit
📄 mkfs.ext3 | ✏️ Edit
📄 mkfs.ext4 | ✏️ Edit
📄 mkfs.minix | ✏️ Edit
📄 mkfs.xfs | ✏️ Edit
📄 mkhomedir_helper | ✏️ Edit
📄 mklost+found | ✏️ Edit
📄 mksquashfs | ✏️ Edit
📄 mkswap | ✏️ Edit
📄 modinfo | ✏️ Edit
📄 modprobe | ✏️ Edit
📄 modsec-sdbm-util | ✏️ Edit
📄 mount.fedfs | ✏️ Edit
📄 mount.fuse | ✏️ Edit
📄 mount.nfs | ✏️ Edit
📄 mount.nfs4 | ✏️ Edit
📄 mountstats | ✏️ Edit
📄 mysqld | ✏️ Edit
📄 mysqld-debug | ✏️ Edit
📄 named | ✏️ Edit
📄 named-checkconf | ✏️ Edit
📄 named-checkzone | ✏️ Edit
📄 named-compilezone | ✏️ Edit
📄 named-journalprint | ✏️ Edit
📄 named-nzd2nzf | ✏️ Edit
📄 nameif | ✏️ Edit
📄 nethogs | ✏️ Edit
📄 NetworkManager | ✏️ Edit
📄 newusers | ✏️ Edit
📄 nfct | ✏️ Edit
📄 nfsconf | ✏️ Edit
📄 nfsdcld | ✏️ Edit
📄 nfsdclddb | ✏️ Edit
📄 nfsdclnts | ✏️ Edit
📄 nfsdcltrack | ✏️ Edit
📄 nfsidmap | ✏️ Edit
📄 nfsiostat | ✏️ Edit
📄 nfsref | ✏️ Edit
📄 nfsstat | ✏️ Edit
📄 nft | ✏️ Edit
📄 ngrep | ✏️ Edit
📄 nologin | ✏️ Edit
📄 nscd | ✏️ Edit
📄 nsec3hash | ✏️ Edit
📄 nstat | ✏️ Edit
📄 ntpd | ✏️ Edit
📄 ntpdate | ✏️ Edit
📄 ntpq | ✏️ Edit
📄 openport | ✏️ Edit
📄 osms | ✏️ Edit
📄 outbound-throttle | ✏️ Edit
📄 outbound-whitelist | ✏️ Edit
📄 ownership | ✏️ Edit
📄 packer | ✏️ Edit
📄 pam_console_apply | ✏️ Edit
📄 pam_namespace_helper | ✏️ Edit
📄 pam_timestamp_check | ✏️ Edit
📄 paperconfig | ✏️ Edit
📄 parted | ✏️ Edit
📄 partprobe | ✏️ Edit
📄 partx | ✏️ Edit
📄 pidof | ✏️ Edit
📄 ping | ✏️ Edit
📄 ping6 | ✏️ Edit
📄 pivot_root | ✏️ Edit
📄 plipconfig | ✏️ Edit
📄 pluginviewer | ✏️ Edit
📄 portrelease | ✏️ Edit
📄 portreserve | ✏️ Edit
📄 poweroff | ✏️ Edit
📄 pure-authd | ✏️ Edit
📄 pure-certd | ✏️ Edit
📄 pure-config.pl | ✏️ Edit
📄 pure-ftpd | ✏️ Edit
📄 pure-ftpwho | ✏️ Edit
📄 pure-mrtginfo | ✏️ Edit
📄 pure-quotacheck | ✏️ Edit
📄 pure-uploadscript | ✏️ Edit
📄 pwck | ✏️ Edit
📄 pwconv | ✏️ Edit
📄 pwhistory_helper | ✏️ Edit
📄 pwunconv | ✏️ Edit
📄 quotacheck | ✏️ Edit
📄 quotaoff | ✏️ Edit
📄 quotaon | ✏️ Edit
📄 quotastats | ✏️ Edit
📄 rbld | ✏️ Edit
📄 rbldstats | ✏️ Edit
📄 rdisc | ✏️ Edit
📄 rdma | ✏️ Edit
📄 readprofile | ✏️ Edit
📄 reboot | ✏️ Edit
📄 repquota | ✏️ Edit
📄 request-key | ✏️ Edit
📄 resize2fs | ✏️ Edit
📄 resizepart | ✏️ Edit
📄 restorecon | ✏️ Edit
📄 restorecon_xattr | ✏️ Edit
📄 rfkill | ✏️ Edit
📄 rmmod | ✏️ Edit
📄 rndc | ✏️ Edit
📄 rndc-confgen | ✏️ Edit
📄 rngd | ✏️ Edit
📄 rotatelogs | ✏️ Edit
📄 route | ✏️ Edit
📄 rpc.gssd | ✏️ Edit
📄 rpc.idmapd | ✏️ Edit
📄 rpc.mountd | ✏️ Edit
📄 rpc.nfsd | ✏️ Edit
📄 rpc.statd | ✏️ Edit
📄 rpcbind | ✏️ Edit
📄 rpcctl | ✏️ Edit
📄 rpcdebug | ✏️ Edit
📄 rpcinfo | ✏️ Edit
📄 rsyslogd | ✏️ Edit
📄 rtacct | ✏️ Edit
📄 rtcwake | ✏️ Edit
📄 rtkitctl | ✏️ Edit
📄 rtmon | ✏️ Edit
📄 rtstat | ✏️ Edit
📄 runlevel | ✏️ Edit
📄 runq | ✏️ Edit
📄 runuser | ✏️ Edit
📄 sa | ✏️ Edit
📄 saslauthd | ✏️ Edit
📄 sasldblistusers2 | ✏️ Edit
📄 saslpasswd2 | ✏️ Edit
📄 sefcontext_compile | ✏️ Edit
📄 selabel_digest | ✏️ Edit
📄 selabel_get_digests_all_partial_matches | ✏️ Edit
📄 selabel_lookup | ✏️ Edit
📄 selabel_lookup_best_match | ✏️ Edit
📄 selabel_partial_match | ✏️ Edit
📄 selinuxconlist | ✏️ Edit
📄 selinuxdefcon | ✏️ Edit
📄 selinuxenabled | ✏️ Edit
📄 selinuxexeccon | ✏️ Edit
📄 selinux_check_access | ✏️ Edit
📄 semanage | ✏️ Edit
📄 semodule | ✏️ Edit
📄 sendmail | ✏️ Edit
📄 service | ✏️ Edit
📄 sestatus | ✏️ Edit
📄 setcap | ✏️ Edit
📄 setenforce | ✏️ Edit
📄 setfiles | ✏️ Edit
📄 setquota | ✏️ Edit
📄 setsebool | ✏️ Edit
📄 sfdisk | ✏️ Edit
📄 sgdisk | ✏️ Edit
📄 showmount | ✏️ Edit
📄 shutdown | ✏️ Edit
📄 slattach | ✏️ Edit
📄 sm-notify | ✏️ Edit
📄 smartctl | ✏️ Edit
📄 smartd | ✏️ Edit
📄 snmpd | ✏️ Edit
📄 snmptrapd | ✏️ Edit
📄 ss | ✏️ Edit
📄 sshd | ✏️ Edit
📄 sssd | ✏️ Edit
📄 sss_cache | ✏️ Edit
📄 start-statd | ✏️ Edit
📄 start-stop-daemon | ✏️ Edit
📄 suexec | ✏️ Edit
📄 sulogin | ✏️ Edit
📄 swaplabel | ✏️ Edit
📄 swapoff | ✏️ Edit
📄 swapon | ✏️ Edit
📄 switch_root | ✏️ Edit
📄 sysctl | ✏️ Edit
📄 t1libconfig | ✏️ Edit
📄 tc | ✏️ Edit
📄 tcpdump | ✏️ Edit
📄 tcpslice | ✏️ Edit
📄 telinit | ✏️ Edit
📄 testsaslauthd | ✏️ Edit
📄 tipc | ✏️ Edit
📄 tmpwatch | ✏️ Edit
📄 tracepath | ✏️ Edit
📄 tracepath6 | ✏️ Edit
📄 tsig-keygen | ✏️ Edit
📄 tune2fs | ✏️ Edit
📄 tuned | ✏️ Edit
📄 tuned-adm | ✏️ Edit
📄 udevadm | ✏️ Edit
📄 umount.nfs | ✏️ Edit
📄 umount.nfs4 | ✏️ Edit
📄 unix_chkpwd | ✏️ Edit
📄 unix_update | ✏️ Edit
📄 unsquashfs | ✏️ Edit
📄 update-alternatives | ✏️ Edit
📄 update-smart-drivedb | ✏️ Edit
📄 useradd | ✏️ Edit
📄 userdel | ✏️ Edit
📄 usermod | ✏️ Edit
📄 validatetrans | ✏️ Edit
📄 vdpa | ✏️ Edit
📄 vigr | ✏️ Edit
📄 vipw | ✏️ Edit
📄 virt-what | ✏️ Edit
📄 virt-what-cvm | ✏️ Edit
📄 visudo | ✏️ Edit
📄 vmcore-dmesg | ✏️ Edit
📄 vpddecode | ✏️ Edit
📄 weak-modules | ✏️ Edit
📄 whmapi0 | ✏️ Edit
📄 whmapi1 | ✏️ Edit
📄 whmlogin | ✏️ Edit
📄 wipefs | ✏️ Edit
📄 xfs_admin | ✏️ Edit
📄 xfs_bmap | ✏️ Edit
📄 xfs_copy | ✏️ Edit
📄 xfs_db | ✏️ Edit
📄 xfs_estimate | ✏️ Edit
📄 xfs_freeze | ✏️ Edit
📄 xfs_fsr | ✏️ Edit
📄 xfs_growfs | ✏️ Edit
📄 xfs_info | ✏️ Edit
📄 xfs_io | ✏️ Edit
📄 xfs_logprint | ✏️ Edit
📄 xfs_mdrestore | ✏️ Edit
📄 xfs_metadump | ✏️ Edit
📄 xfs_mkfile | ✏️ Edit
📄 xfs_ncheck | ✏️ Edit
📄 xfs_quota | ✏️ Edit
📄 xfs_repair | ✏️ Edit
📄 xfs_rtcp | ✏️ Edit
📄 xfs_spaceman | ✏️ Edit
📄 xqmstats | ✏️ Edit
📄 xtables-monitor | ✏️ Edit
📄 xtables-nft-multi | ✏️ Edit
📄 zic | ✏️ Edit
📄 zramctl | ✏️ Edit